AMSOIL Saber Synthetic Professional 100:1 Pre-Mix 2-Cycle Oil (ATP)
AMSOIL Saber Professional (ATP) is formulated with exclusive AMSOIL synthetic base oils and premium additives.
Designed for lean mix ratios in two-cycle motors, Saber 2-Cycle Oil has excellent lubricity and cleanliness
properties to control friction and prevent wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL
Synthetic 100:1 2-Cycle Oils have been protecting and providing improved performance in two-cycle motors since
1973. ISO-L-EGD, JASO FD, API TC
Which AMSOIL 2-cycle oil is best for your application?
Saber Professional (ATP) is specifically designed for small engines including, but not limited to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters and go-carts. It is available in a 3.5- oz. bilingual (English/Spanish) container which is ideal for treating the 2 - 2.5-gallon cans of gas commonly used for storing mixed gas on the job. Saber Professional is also very good for use in motorcycles, snowmobiles, ATVs, jet boats and personal watercraft. Saber Professional is formulated with high-temperature detergent additives to prevent hard carbon deposits from forming in these hot-operating motors. Saber Professional is "smokeless" and delivers fewer emissions at 100:1 mix ratios than oils mixed at 50:1. Equipment operators subjected to smoke and fumes will benefit from these low emission properties. Because one mix ratio satisfies multiple pieces of equipment, Saber Professional eliminates mix ratio confusion. Saber Professional is recommended for pre-mix where ISO-L-EGD, JASO FD or API TC is specified.
AMSOIL, the leader in automotive synthetic lubrication, produced the world's first API qualified synthetic motor oil in 1972. Trust the extensive experience of AMSOIL, The First in Synthetics® , to do the best job protecting your ride.
AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal service. Richer mix ratios may be used where desired.
Typical Technical Properties
AMSOIL Saber Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP)
|Viscosity @ 100°C, cSt (ASTM D-445)||13.5|
|Viscosity @ 40°C, cSt (ASTM D-445)||99|
|Viscosity Index (ASTM D-2270)||136|
|Pour Point °C (°F) (COC) (ASTM D-97)||-36 (-33)|
|Flash Point °C (°F) (COC) (ASTM D-92)||114 (237)|
|Fire Point °C (°F) (ASTM D 92)||114 (237)|
|DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN.|
We're now on Facebook!
Buy at wholesale price!
Preferred Customers buy at dealer cost and save 25%!
Not sure which products to get for your vehicle? Use the Vehicle Lookup Guide.
AMSOIL Distributor Opportunities
Start your own home business based on a proven superior product. Very low startup costs.
Sell AMSOIL products in your shop or store. Click here for information on AMSOIL retail accounts.
Does your business purchase lubricants for its equipment? Click for information about AMSOIL commercial accounts! Extend your equipment's life and reduce costs!